Toyota

Toyota Camry VII XV50 (2012-2017) – Fuse Box Diagrams and Ratings

Toyota Camry VII XV50 (2012-2017) has a main engine compartment fuse box and a second panel under the driver’s dashboard. The layout below retains 39 named engine box positions, including two spare fuses in the cover, and all 39 numbered cabin positions with their documented alternatives. It is based primarily on the 2012 Toyota Camry non-hybrid owner’s manual, which covers 2.5 L 2AR-FE and 3.5 L V6 2GR-FE petrol engines.

Applicability: fuse assignments can differ on facelift 2015-2017 vehicles, other destination markets and Camry Hybrid models. The diagrams here are for the non-hybrid 2012-style electrical installation and should not be used as a universal guide for the hybrid powertrain. Compare fuse names and numbers with the lid legend of your particular Camry.

Cigarette lighter and 12 V socket: cabin position 34, CIG&P/OUTLET (15 A) supplies the front power outlet. The optional rear accessory outlet is on cabin 15, P/OUTLET RR (20 A). Both are in the passenger compartment box.

Where are the Toyota Camry XV50 fuse boxes?

Engine compartment: with the ignition and accessories switched off, open the bonnet and find the black power distribution box near the battery on the driver’s side of the engine bay in left-hand-drive models. Release the lid catches carefully. The main box contains smaller protection fuses and high-current ALT, EPS and ABS links; workshop tools may be required to replace bolted or cartridge types. Positions 38 and 39 in the reference are spare fuses stored inside the box lid, not extra powered circuits.

Passenger compartment: open the driver’s door, move the seat rearwards and look under the lower edge of the dashboard on the driver’s side. Remove the small access cover gently and read the numbering and ratings printed inside it. Check the fuse’s printed amp number, not only its plastic colour. Right-hand-drive vehicles may have a different panel access route.

Engine compartment – all fuse positions and spare holders

The engine box includes ALT (120 A) for charging, EPS (80 A) for electric steering, ABS NO.1 (50 A), ABS NO.2 (30 A), EFI and INJ injection circuits, and separate low-beam headlight protection. The schematic shows the main numbered engine carrier; the two spare holders at positions 38 and 39 sit on the reverse side of the cover.

Engine-specific variants are preserved as separate rows: EFI NO.3 at position 14 is 7.5 A for 2AR-FE or 10 A for 2GR-FE. At position 33 the 2.5 L engine uses EFI-MAIN NO.2 (20 A), while the 3.5 V6 labels the same position A/F (20 A). Do not confuse these alternatives with duplicate simultaneous fuses.

Toyota Camry VII XV50 2012-2017 engine bay fuse box 1-39 including spare fuses on cover
Skrzynka w komorze silnika Camry XV50 – układ zabezpieczeń
Position Amperage [A] Protected circuit / function
1 5 METER-IG2 – Zasilanie wskaźników i zestawu przyrządów. METER-IG2: instrument gauges and cluster supply
2 50 FAN – Wentylatory chłodnicy w wersji z silnikiem V6 3.5 (2GR-FE). FAN: radiator cooling fans on 3.5 L V6 (2GR-FE) engine
3 30 H-LPCLN – Wykaz dla wersji amerykańskiej nie przypisuje obwodu. Na innych rynkach oznaczenie może dotyczyć spryskiwaczy reflektorów; wyposażenie sprawdź na pokrywie. H-LPCLN: no assigned circuit in baseline US chart; may serve headlamp cleaning on other markets
4 50 HTR – Główne zasilanie nawiewu i klimatyzacji. HTR: main cabin blower and air conditioning power supply
5 120 ALT – Główne zabezpieczenie układu ładowania i alternatora. ALT: alternator and main charging system high-current link
6 30 ABS NO.2 – Układ ABS i stabilizacji toru jazdy VSC. ABS NO.2: ABS and vehicle stability control (VSC)
7 30 ST/AM2 – System startowy. ECU-IG2 NO.1. A/B. ECU-IG2 NO.2 ST/AM2: starting circuit, ECU-IG2 NO.1, airbag and ECU-IG2 NO.2 supply
8 30 H-LP-MAIN – H-LP LH-LO. H-LP RH-LO. MNL H-LP LVL. światła mijania H-LP-MAIN: main supply for left/right dipped beam and headlamp levelling
9 50 ABS NO.1 – Główne zasilanie układu ABS i stabilizacji toru jazdy VSC. ABS NO.1: primary ABS and vehicle stability control high-current feed
10 80 EPS – Wysokoprądowe zasilanie elektrycznego wspomagania kierownicy. EPS: electric power steering high-current supply
11 7.5 S-HORN – Obwód dodatkowego sygnału dźwiękowego. zależnie od wyposażenia. S-HORN: auxiliary horn circuit, equipment-dependent
12 10 HORN – Sygnały dźwiękowe samochodu. HORN: vehicle horn
13 15 EFI NO.2 – Układ wielopunktowego/sekwencyjnego wtrysku paliwa. elektronicznie sterowana skrzynia biegów EFI NO.2: multiport/sequential fuel injection and electronically controlled automatic transmission
14 7.5 EFI NO.3 – Układ wtrysku paliwa – 2.5 2AR-FE; odmienne fabryczne wartości wkładki. EFI NO.3: fuel injection, 2.5 L 2AR-FE petrol version
14 10 EFI NO.3 – Układ wtrysku paliwa – 3.5 V6 2GR-FE; odmienne fabryczne wartości wkładki. EFI NO.3: fuel injection, 3.5 L V6 2GR-FE petrol version
15 7.5 INJ – Układ wielopunktowego/sekwencyjnego wtrysku paliwa INJ: multiport/sequential fuel injection
16 7.5 ECU-IG2 NO.3 – Układ wielopunktowego/sekwencyjnego wtrysku paliwa. blokada układu kierowniczego. elektronicznie sterowana skrzynia biegów ECU-IG2 NO.3: injection ECU, electric steering-column lock and automatic transmission controller
17 15 IGN – Sterowanie układem rozruchu i zapłonu. IGN: starting and ignition controls
18 20 D/L-AM2 – Brak przypisanego obwodu w podstawowej wersji amerykańskiej z 2012 roku; oznaczenie może mieć zastosowanie w innych specyfikacjach. D/L-AM2: not assigned in baseline 2012 US specification, possibly fitted on other markets
19 25 IG2-MAIN – IGN. INJ. METR-IG2. ECU-IG2 NR 3. A/B. ECU-IG2 NR 2. ECU-IG2 NR 1 IG2-MAIN: ignition supply to IGN, INJ, METER-IG2, ECU-IG2 circuits and airbag control
20 7.5 ALT-S – Obwód pomiaru i regulacji napięcia alternatora. ALT-S: alternator voltage sensing and regulation circuit
21 5 MAYDAY – Obwód połączeń alarmowych i telematyki w wyposażonych wersjach. MAYDAY: optional emergency call and telematics equipment
22 15 TURN&HAZ – Kierunkowskazy. światła awaryjne i kontrolki w zestawie wskaźników. TURN&HAZ: turn indicators, hazard flashers and cluster indicators
23 10 STRG LOCK – Elektroniczna blokada kolumny kierowniczej. STRG LOCK: electronic steering-column lock
24 15 AMP – Wzmacniacz fabrycznego zestawu audio. AMP: factory audio amplifier
25 15 H-LP LH-LO – Lewy reflektor świateł mijania – 15 A w wersji halogenowej. a także układ ręcznego poziomowania lamp. H-LP LH-LO: left dipped-beam headlamp, halogen version; also manual headlamp levelling
25 20 H-LP LH-LO – Lewy reflektor świateł mijania – 20 A w wersji ksenonowej (HID). a także układ ręcznego poziomowania lamp. H-LP LH-LO: left dipped-beam HID/discharge headlamp, alternative higher-rated circuit
26 15 H-LP RH-LO – Prawy reflektor świateł mijania – 15 A w wersji halogenowej. H-LP RH-LO: right dipped-beam headlamp, halogen version
26 20 H-LP RH-LO – Prawy reflektor świateł mijania – 20 A w wersji ksenonowej (HID). H-LP RH-LO: right dipped-beam HID/discharge headlamp, alternative higher-rated circuit
27 7.5 MNL H-LP LVL – Reflektor ksenonowy (HID): System ręcznego poziomowania reflektorów MNL H-LP LVL: manual headlamp levelling on specified discharge-lamp vehicles
28 30 EFI-MAIN NO.1 – Układ wielopunktowego/sekwencyjnego wtrysku paliwa. EFI NO.2. EFI NO.3. czujnik A/F EFI-MAIN NO.1: main fuel injection supply, EFI NO.2, EFI NO.3 and air/fuel ratio sensor
29 5 SMART – Brak przypisanego obwodu w podstawowej wersji amerykańskiej z 2012 roku; oznaczenie może mieć zastosowanie w innych specyfikacjach. SMART: not assigned in the baseline 2012 US chart; may be used in other specifications
30 10 ETCS – Elektroniczne sterowanie przepustnicą. ETCS: electronic throttle control system
31 20 TOWING – Brak przypisanego obwodu w podstawowej wersji amerykańskiej z 2012 roku; oznaczenie może mieć zastosowanie w innych specyfikacjach. TOWING: no assigned circuit in baseline US specification; other towing configurations may use it
32 7.5 EFI NO.1 – Układ wielopunktowego/sekwencyjnego wtrysku paliwa. elektronicznie sterowana skrzynia biegów EFI NO.1: multiport/sequential injection and electronically controlled automatic transmission
33 20 EFI-MAIN NO.2 – Czujnik składu mieszanki paliwowo-powietrznej A/F w silniku benzynowym 2.5 2AR-FE. EFI-MAIN NO.2: air/fuel ratio mixture sensor supply, 2.5 L 2AR-FE engine
33 20 A/F – Czujnik składu mieszanki paliwowo-powietrznej A/F w silniku benzynowym 3.5 V6 2GR-FE. A/F: air/fuel ratio mixture sensor supply, 3.5 L V6 2GR-FE engine
34 7.5 AM 2 – System inteligentnego kluczyka Smart Key (AM2). AM 2: Smart Key / intelligent key starting system
35 20 RADIO-B – Zasilanie radia i systemu nawigacji. RADIO-B: audio and navigation system
36 7.5 DOME – Zegar. lampki wnętrza i schowków. oświetlenie drzwi oraz bagażnika. DOME: clock, vanity lights, cabin lights, glovebox, door and luggage compartment lamps
37 10 ECU-B NO.1 – System komunikacji multipleksowej. system inteligentnego kluczyka Smart Key. wskaźnik i mierniki. system ostrzegania o ciśnieniu w oponach. bezprzewodowy pilot zdalnego sterowania. czujnik układu kierowniczego. system klasyfikacji pasażerów w przednim przedziale pasażerskim. monitor martwego pola ECU-B NO.1: multiplex network, smart key, gauges, TPMS, wireless remote, steering sensor, occupant classification and blind spot monitor
38 25 SPARE – Zapasowy bezpiecznik 25 A w uchwycie na spodzie pokrywy skrzynki komory silnika (nie jest podłączony do odbiornika). SPARE: replacement 25 A fuse in the engine box cover, not an active circuit
39 30 SPARE – Zapasowy bezpiecznik 30 A w uchwycie na spodzie pokrywy skrzynki komory silnika (nie jest podłączony do odbiornika). SPARE: replacement 30 A fuse in the engine box cover, not an active circuit

Passenger compartment – full numbered fuse table

The cabin panel includes WIPER (25 A), WASHER (10 A), OBD (10 A), STOP (7.5 A), CIG&P/OUTLET (15 A), rear power outlet (20 A), electric windows, locks, seats and multiple electronic controllers. The baseline 2012 US guide numbers 37 cabin slots. The source’s wider compiled 39-position reference and some alternative entries reflect other configurations, so the table retains all 45 source rows including alternative assignments for positions 5, 6, 7, 14, 17 and 18.

Do not assume that two differently rated rows for one printed number are both installed. Select the fuse label corresponding to the actual vehicle’s manufacturing year, region and options.

Toyota Camry VII XV50 2012-2017 passenger dashboard fuse box positions 1-39
Skrzynka bezpieczników w kabinie Camry XV50
Position Amperage [A] Protected circuit / function
1 10 ECU-IG1 NO.2 – System sterowania blokadą zmiany biegów. podgrzewacze siedzeń. system inteligentnego kluczyka Smart Key. system ostrzegania o ciśnieniu w oponach. bezprzewodowy pilot zdalnego sterowania. system komunikacji multipleksowej. system audio. nawigacja. szyberdach. automatycznie przyciemniane lusterko wewnętrzne. ECU-IG1 NO.2: shift lock, heated seats, Smart Key, TPMS, remote locking, multiplex network, radio/navigation, moonroof and auto-dimming interior mirror
2 10 ECU-IG1 NO.1 – Układ stabilizacji toru jazdy VSC. elektryczne wentylatory chłodzące. czujnik układu kierowniczego. układ wielopunktowego/sekwencyjnego wtrysku paliwa. system ładowania. ogrzewanie tylnej szyby. podgrzewanie lusterek zewnętrznych. Blind Spot Monitor ECU-IG1 NO.1: VSC, cooling fans, steering angle sensor, fuel injection, charging, heated rear window and mirrors, blind spot monitor
3 10 PANEL – Podświetlenie przełączników. lewarka skrzyni biegów i schowka. sterowanie oświetleniem zestawu audio i klimatyzacji. PANEL: instrument, shifter, glovebox, audio and climate control illumination
4 15 TAIL – Światła pozycyjne. tylne. obrysowe i oświetlenie tablicy rejestracyjnej. a w wyposażonych wersjach również światła przeciwmgielne. TAIL: position, tail, side-marker and number plate lights and optional fog lamps
5 7.5 EPS-IG1 – Zasilanie sterowania elektrycznym wspomaganiem kierownicy. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. EPS-IG1: electric power steering controller supply; alternative assignment in certain market layouts
5 20 DOOR R/R – Podnośnik elektrycznej szyby w prawych tylnych drzwiach. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. DOOR R/R: right rear electric window; alternative 20 A assignment at this numbered position
6 7.5 ECU-IG1 NO.3 – Monitorowanie martwego pola w wersjach wyposażonych w ten system. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. ECU-IG1 NO.3: blind spot monitoring on equipped cars, alternate circuit for this position
6 20 DOOR F/L – Podnośnik elektrycznej szyby w lewych przednich drzwiach. sterownik lusterka. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. DOOR F/L: left front electric window and door mirror ECU, alternate 20 A assignment
7 10 S/HTR&FAN F/L – Podgrzewanie i wentylacja lewego przedniego fotela. zależnie od wyposażenia. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. S/HTR&FAN F/L: left front seat heating and ventilation on equipped vehicles
7 20 DOOR R/L – Podnośnik elektrycznej szyby w lewych tylnych drzwiach. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. DOOR R/L: left rear electric window, alternative specification
8 7.5 H-LP LVL – Automatyczne poziomowanie reflektorów w wariantach wyposażenia; podstawowy wykaz USA wskazuje brak obwodu. H-LP LVL: automatic headlamp levelling where fitted; unassigned in baseline US listing
9 10 WASHER – Spryskiwacz przedniej szyby oraz sterowanie wycieraczkami. WASHER: windscreen washer motor and wiper controls
10 7.5 A/C-IG1 – Sterowanie układem klimatyzacji po włączeniu zapłonu. A/C-IG1: ignition-switched climate control
11 25 WIPER – Silnik przednich wycieraczek i układ spryskiwacza. WIPER: front windscreen wiper motor and washer circuit
12 7.5 BKUP LP – Światła cofania. układ wtrysku paliwa. sterowanie automatyczną skrzynią biegów i zasilanie wybranych obwodów systemu audio/nawigacji. BKUP LP: reversing lights, fuel injection, automatic transmission and some audio/navigation supplies
13 30 DOOR NO.1 – Obwody elektrycznych podnośników szyb. DOOR NO.1: electric windows
14 5 WIPER-S – Pozycja bez przypisanego obwodu w podstawowym wykazie; w innych specyfikacjach może dotyczyć wycieraczek. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. WIPER-S: unassigned in base chart; possibly a wiper-related circuit in another configuration
14 7.5 EPS-IG1 – Zasilanie sterowania elektrycznym wspomaganiem kierownicy. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. EPS-IG1: electric power steering supply, alternate 7.5 A assignment
15 20 P/OUTLET RR – Tylne gniazdo zasilania akcesoriów. jeśli występuje. P/OUTLET RR: rear accessory power outlet if fitted
16 5 SFT LOCK-ACC – Blokada wybieraka automatycznej skrzyni biegów. SFT LOCK-ACC: automatic transmission selector shift lock
17 20 DOOR R/R – Podnośnik elektrycznej szyby w prawych tylnych drzwiach. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. DOOR R/R: right rear power window, alternative assignment for this slot
17 10 S/HTR&FAN F/R – Podgrzewanie i wentylacja prawego przedniego fotela. zależnie od wyposażenia. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. S/HTR&FAN F/R: right front seat heating and ventilation
18 20 DOOR R/L – Podnośnik elektrycznej szyby w lewych tylnych drzwiach. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. DOOR R/L: left rear power window, alternative assignment
18 10 S/HTR&FAN F/L – Podgrzewanie i wentylacja lewego przedniego fotela. zależnie od wyposażenia. W tej pozycji oryginalne zestawienie podaje także wariant obsady zależny od rynku lub rocznika; porównaj oznaczenia na osłonie. S/HTR&FAN F/L: left front seat heating and ventilation, alternative assignment
19 10 OBD – Złącze diagnostyczne OBD-II. OBD: on-board diagnostic connector
20 10 ECU-B NO.2 – Sterownik inteligentnego kluczyka Smart Key i monitorowania ciśnienia opon. ECU-B NO.2: Smart Key and tyre pressure monitoring controllers
21 20 DOOR NO.2 – Obwody elektrycznych podnośników szyb. DOOR NO.2: electric windows
22 7.5 AM1 – Zasilanie układu rozruchowego i sterowania wtryskiem. AM1: starting and fuel injection control supply
23 7.5 STOP – Światła STOP. dodatkowe wysoko zamontowane światło hamowania. sterowniki ABS/VSC. sygnał hamowania dla ECU i automatycznej skrzyni oraz blokada wybieraka Smart Key. STOP: brake and high-mounted stop lights, ABS/VSC brake signal, ECU, automatic gearbox and Smart Key shift lock
24 30 P/SEAT RR – Pozycja oznaczona jako bez przypisanego obwodu w podstawowym wykazie. P/SEAT RR: listed without an assigned circuit in baseline specification
25 7.5 A/C-B – Zasilanie podtrzymania układu klimatyzacji. A/C-B: air-conditioning memory / backup supply
26 10 S/ROOF – Elektrycznie sterowany szyberdach. S/ROOF: electric moonroof
27 30 P/SEAT FR – Elektryczna regulacja przednich foteli. P/SEAT FR: powered front seat adjustment
28 30 PSB – Pozycja bez przypisanego obwodu w podstawowym wykazie. PSB: listed without an assigned circuit in baseline specification
29 20 D/L-AM1 – System komunikacji multipleksowej. zamek elektrozaczepowy. przełącznik otwierania bagażnika D/L-AM1: multiplex communication, door latch and boot release switch
30 20 TI&TE – Pozycja bez przypisanego obwodu w podstawowym wykazie. TI&TE: listed without an assigned circuit in baseline specification
31 10 A/B – System poduszek powietrznych SRS oraz czujniki klasyfikacji pasażera przedniego fotela. A/B: SRS airbags and front passenger occupant classification sensors
32 7.5 ECU-IG2 NO.1 – Układ wielopunktowego/sekwencyjnego wtrysku paliwa ECU-IG2 NO.1: multiport/sequential fuel injection
33 7.5 ECU-IG2 NO.2 – System inteligentnego kluczyka Smart Key. Monitor martwego pola ECU-IG2 NO.2: Smart Key and blind spot monitor
34 15 CIG&P/ OUTLET – Gniazdo zapalniczki i przednie gniazdo zasilania 12 V. CIG&P/OUTLET: cigarette lighter and front 12 V power socket
35 7.5 ECU-ACC – Zegar. lusterka zewnętrzne. system komunikacji multipleksowej. system audio. nawigacja ECU-ACC: clock, power door mirrors, multiplex network, audio and navigation
36 10 S/HTR&FAN FI R – Podgrzewanie i wentylacja prawego przedniego fotela. zależnie od wyposażenia. S/HTR&FAN F/R: front right seat heating and ventilation, equipment-dependent
37 20 S/HTR RR – Brak przypisanego obwodu w podstawowym wykazie. S/HTR RR: no assigned circuit in baseline specification
38 10 DOOR F/R – Podnośnik elektrycznej szyby w prawych przednich drzwiach. sterownik lusterka. DOOR F/R: right front electric window and mirror controller
39 7.5 ECU-IG1 NO.3 – Monitorowanie martwego pola w wersjach wyposażonych w ten system. ECU-IG1 NO.3: blind spot monitor on equipped vehicles

Differences between 2.5 L, 3.5 V6, headlamps and model years

Petrol injection: the 2AR-FE four-cylinder and 2GR-FE V6 have different EFI NO.3 ratings at under-bonnet position 14, and different labels for position 33. A rating suitable for the V6 should never be inserted into the four-cylinder box just because the slot number matches.

Halogen or HID headlamps: left and right dipped-beam positions 25 and 26 have 15 A for halogen lamps or 20 A for HID/discharge lamps in the relevant manual. MNL H-LP LVL at 27 (7.5 A) is associated with headlamp levelling on equipped cars.

2015-2017 and other markets: later revisions can change equipment, headlight types, cabin controls and fuse labels. These tables are grounded in the 2012 non-hybrid design and do not guarantee identical installation on every later year. The Camry Hybrid uses additional electrical equipment and requires its own factory documentation.

Practical fuse checks for Toyota Camry XV50

No power at the cigarette lighter / front 12 V outlet: inspect cabin 34 CIG&P/OUTLET (15 A). If the rear outlet is affected, check 15 P/OUTLET RR (20 A). Remove charging adapters before replacing the fuse, and check for shorted contacts in the socket.

Front windscreen wipers or washer not working: cabin position 11 WIPER (25 A) protects the wipers, while 9 WASHER (10 A) supplies the washer. If the washer runs but the blades do not, inspect the motor linkage and switch.

Engine does not start: depending on symptoms, check under-bonnet 7 ST/AM2 (30 A), 28 EFI-MAIN NO.1 (30 A), 13 EFI NO.2 (15 A) and the correct engine-specific EFI NO.3 at position 14. Also inspect battery and earth connections and read engine ECU diagnostic codes.

One dipped-beam headlight fails: check engine 8 H-LP-MAIN (30 A) and the left/right headlamp fuses at 25 and 26. Their amp rating differs between halogen and HID versions. Check the headlamp connector and bulb or ballast when the fuse is good.

ABS or power steering warning: the main high-current engine-box links are ABS NO.1 (50 A), ABS NO.2 (30 A) and EPS (80 A). These circuits can involve high currents and diagnostic trouble codes; do not replace large links without confirming a short or open circuit and following Toyota service instructions.

For another Toyota family sedan, see Toyota Corolla E140/E150 (2006-2013). The larger European Toyota Avensis II T25 (2003-2009) has a different generation of electrical distribution. These guides are useful for identifying Toyota’s naming conventions but do not provide interchangeable fuse positions for the Camry.

Factory reference: 2012 Toyota Camry owner’s manual, maintenance and fuse-box chapter, with separate 2AR-FE and 2GR-FE engine notes and halogen/HID lamp ratings. Always check the VIN-matched handbook for later model years or hybrid vehicles.

Leave a Comment